RadioLink PIXHAWK

NEW CIRCUIT DESIGN

Less Interference of Inner Components

Unique Automation Software Testing System

Brand Assurance

22+ years of RC experience.

RadioLink Electronic Limited was founded on September 15th, 2003, and registered trademark in China, European Union and USA.

In 2013, ten channels transmitter AT10 with full functions and full model types was launched. Radiolink succeeded in finishing the strategy transformation from full set of electronic design solutions provider to professional RC remote control system designer and manufacturer.

R&D Capacity

In 2014, Radiolink planned to develop flight controller and picked up the PIXHAWK finally by comparing most of the flight controllers.

It took about one year and seven months to repeatedly test and learn all the functions such as basic use, PID parameter regulation, review a Log of helicopter, fixed wing, multicopter, car and boat.

Redesigned the circuit after totally understanding the circuit design and program code of PIXHAWK, achieved less interference of inner components, less noise, more accurate compass and safety while flying, resolved the problem that Altitude Hold was not so much precision.

Quality Assurance

Radiolink took about six months to develop the Automation software Testing system, ensuring the quality of every function of every PIXHAWK.

As the only PlX manufacturer that realizes test automation from the sensor to the interface, testing efficiency of Radiolink is far more than traditional manual testing.

Production Assurance

Complete automatic, anti-static form SMT to welding achieved less interference of inner components.

Full mechanical, anti-static, fully automated welding from patch to backhand welding, to reduce the interference of geomagnetic sensors, which greatly improves the efficiency of production inspection.

All the chips, such as the processor, sensors, and others, are imported as a whole package by the primary agency. Dust-free and environmentally-friendly workshop ensures its durability.

Equipped with the SUI04, Omnidirectional Obstacle Avoidance

An external I2C expansion board can be connected, supporting up to 6 SUI04 ultrasonic obstacle avoidance modules, achieving omnidirectional obstacle avoidance in all directions (front, back, left, right, and upward), as well as altitude hold downwards. This ensures safety for applications such as firefighting, emergency rescue, tea garden and orchard plant protection, and educational training.

Obstacle Avoidance

Front Back Left Right Upward

I2C Expansion Board

PIXHAWK

Altitude hold downwards

Power Module* with Wide Voltage Input

The power module that comes with the flight controller with a wide voltage input range of 2-12S (7.4-50.4V), a maximum detection current of 90A (single ESC maximum detection current is 22.5A), a BEC output voltage of 5.3±0.2V, and a BEC output current of 2A.

*Note: The default factory packing only includes one piece of power module (choose one from the two power modules above). When purchasing, please choose the correct power module package version according to the installation requirements.

PIXHAWK Connectors(Radiolink PIXHAWK is 2.4.8)

SBUS signal output

R9DS(AT10II/AT9S Pro) SBUS signal input

Buzzer

Serial

Safety switch button

GPS module

CAN(controller area network) bus

Analog to digital converter 3.3V

I2C splitter or compass module

Analog to digital converter 6.6V

Power module

SPI(serial peripheral interface) bus

LED indicator

USB

Telemetry(on-screen display)

Telemetry(radio telemetery)

Spektrum DSM receiver

Auxiliary Outputs

Main Outputs

（for motors）

Input/output reset button

ground

power

signal

Flight management reset button

Micro-USB port

82.2mm

16.5mm

51.8mm

SD card

Comprehensive Technical Support

With more than 22 years of R&D experience in the electric industry can provide detailed instructions and tutorial videos from installation to flight.

All-round technical support, including installation, application, and calibration, from ESC, motor, and HD image transmission to the flight controller and transmitter.

Radiolink complete package: transmitter AT9S Pro (supports multicopter) + PIXHAWK flight controller + SE100 (Radiolink GPS) +Radiolink Power Module.

Almost all the parts you need for the Drone, we can offer.

* PIXHAWK can set parameters by Radiolink Mission Planner, ArduPilot Mission Planner, and QGC Mission Planner.

* The latest firmware of PIXHAWK will not be notified separately. Please pay attention to the firmware download section of Radiolink's official website to view the latest firmware and firmware instructions. Please upgrade according to your needs.

* In the process of using PIXHAWK, if you encounter problems, you can view the instructions, tutorials, or FAQ on the navigation bar of this introduction.

* After consulting all the tutorials, you still have questions about the operation. You can consult our technical support by emailing after_service@radiolink.com.cn

Package List for PIXHAWK